Win Win Mold

Plastic Mold & Molding Solution

January 5, 2023
3:56 am

How to Design Quenching and Heating Die

How to Design Quenching and Heating Die

1: In the hot and cold water transport channel, the use of waterproof rings shall be minimized; (High temperature type must be used),

It is better to hit the nozzle directly on the mold core. Taper fine teeth (such as PT1/8; PT1/4;)

This is safer.

2. The layout of the water delivery pipeline is generally as follows:? 5–? 6mm shall be evenly distributed, and the spacing is generally

The center of 15-20mm water delivery pipe is 10-15mm from the formed surface; And the waterway layout should be dense.

3: The mold water channel connector must be designed at the upper and lower side or rear side of the mold; Operation side (standing on the side of people)

It is not allowed to have water channel inlet and outlet or water pipe layout to avoid injury to production personnel due to pipe breakage. Remember!

4: The construction holes (unnecessary holes) of the mold shall be plugged with plugs to ensure no air or water leakage,

The method is to use copper plug first, and then use taper throat teeth and high temperature resistant glue to seal

Eight Common Injection Mold Structure Classification

14/01/2023 No Comments

Eight common injection mold structure classification One. Single parting surface injection mold When the mold is opened, the movable mold and the fixed mold are separated, so as to take out the plastic parts, which is called single parting surface mold, also called double-plate mold. It is the simplest and most basic form of injection mold, which can be designed as single-cavity injection mold or multi-cavity injection mold according to the need, and is the

Injection Mold Manufacturing Process And The Basic Processing Process Analysis

14/01/2023 No Comments

Injection mold manufacturing process and the basic processing process analysis The injection mold manufacturing process mainly includes. Acceptance of the task. Mold design. Mold manufacturing. Mold inspection and mold trial. Mold modification and repair. Mold maintenance. I. Acceptance of tasks Plastic mold making, first of all, the customer engineers provide product drawings to the mold manufacturer, the manufacturer through the molding plastic production task requirements, the process of collecting, analyzing, digesting product data, this is

The Difference Between Injection Moulds And Plastic Moulds

14/01/2023 No Comments

The difference between injection moulds and plastic moulds Many people can’t tell the difference between injection molds and plastic molds, and many people even think that they are the same kind of molds, just called different. Although injection molds and plastic molds are both molds, but there is a difference between them. Want to figure out the difference between the two, first and Xiaobian together to understand what is injection mold, what is plastic mold.