What Should Be Paid Attention To When Selecting The Mold Surface In Mold Design?
What should be paid attention to when selecting the mold surface in mold design? Mold parting surface Mold terminology. Generally…
Where Does The Mold Processing Quality Mainly Depend?
Most of the materials used for mold accessories are mold steel materials with high hardness, which requires mold accessories processing equipment…
Whether The Die Is Scrapped Or Repaired After Damage Should Be Considered As Appropriate!
Die failure is the most common problem in stamping production, which often causes production stoppage and affects the production cycle. Therefore,…
What Are The Requirements For Plastic Raw Materials In Hot Runner Injection Molding?
Because the hot runner mold has high requirements for plastics, the hot runner must be selected according to the specific plastics…
The Main Reasons For The Appearance Of Flaring Edge In The Processing Of Injection Mold
Flap edge, also known as flash, overflow, overflow, etc., mostly occurs in the opening and closing position of the mold, such…
What Factors Will Affect The Precision Of Injection Mold Processing
Factors affecting the precision of parts produced by injection mold: 1) Molding materials: plastic shrinkage, fluidity, moisture, volatile content, raw material…
Main Runner Design Guide
Main runner: 1. Definitions: The main runner refers to the section from the contact part of the injector nozzle and the…
What Is Two Color Injection Molding?
Two color injection molding: refers to the molding method of injecting two kinds of plastics with different colors into the same…
Difference Between Two-color Mold And Rubber Coated Mold
Difference between two-color mold and rubber coated mold A. Two color mold: a mold in which two plastic materials are injected…
Process Characteristics Of Insert Injection Molding
Process characteristics of insert injection molding Injection molding of inserts: insert molding refers to the molding process in which pre prepared…
Notes on Design of Metal Inserts for Injection Molding Products
INSERT MOLDING is a kind of plastic mould, commonly known as insert mould. This kind of mold is different from ordinary…
Advantages Of Insert Molding
Advantages of insert molding Some large mold enterprises have pursued not to insert parts at the beginning, but in the end,…
The Characteristics Of Insert Molding Technology
insert molding is a process where the prepared material is loaded into the mold and the resin is injected, and the…
Design Methods And Techniques For Parting Surface Of Injection Moulds
The so-called parting surface is the surface where the die is opened to take out the product. The selection of parting…
The Main Design Points Of Automobile Lamp Reflector Mold
For the automobile lamp reflector mold, the main design points are: (1) Special injection molding process equipment is required, and injection…
